PROSHIELD® · 0.2 MM · HIGH-GLOSS PROTECTION
ProShield® headlight film by the metre & in sheets
A mouldable, impact-absorbing protective film that helps preserve headlights, rear lights and other exposed surfaces. The film is 0.2 mm thick, has a high-gloss finish and is designed for installation by anyone who wants to carry out the work themselves.
Quick facts
Thickness:
0,2 mm
Surface:
High-gloss after installation
Options:
Clear/Transparent, Smoke, Dark Smoke+, Yellow, Blue and Devil Red
Installation:
Wet or dry installation
Forming:
With a heat gun at approximately 100 °C on curved areas
Product warranty:
3 years, subject to the terms
Protects exposed lights
The 0.2 mm film helps protect against stone chips, road salt, dirt and abrasion from the road surface.
99% UV protection
The UV protection helps preserve the surface of the light lens and the appearance of the film during normal use.
Glossier appearance
The high-gloss surface gives the lights a cleaner, better-maintained appearance after correct installation.
Mouldable and easy to handle
The film is shaped over curved light surfaces with a heat gun and is partially self-healing when heated carefully.
Measure the lights before ordering
The size and shape of the lights vary between vehicles. Measure your headlights at their widest and tallest points, add a reasonable installation margin all around, and order the film size accordingly.
CAREFULLY DESIGNED CONSTRUCTION
Three layers for easier installation
ProShield® consists of three layers: a protective liner over the adhesive side, the protective film itself and a removable scratch-protective top layer. This construction reduces the risk of dirt and scratches while the film is being handled and installed.
LAYER 1
Protective liner over the adhesive side
The lower protective liner is removed before installation. The adhesive side of the film is then placed against the thoroughly cleaned light surface.
LAYER 2
The protective film itself
The 0.2 mm ProShield® layer provides impact absorption, protection and the final high-gloss surface.
LAYER 3
Scratch-protective top layer
The top layer protects against installation scratches. Leave it in place for most of the work and peel it off when the installation is nearly complete.
10 QUICK FACTS
Protection, styling and flexible installation
1. Impact-absorbing film
Helps absorb minor impacts and stresses caused by normal driving.
2. 99% UV protection
Protects against a large proportion of harmful UV radiation.
3. Six different options
Choose from Clear/Transparent, Smoke, Dark Smoke+, Yellow, Blue and Devil Red.
4. Shaped with a heat gun
On curved areas, shape the film with a heat gun at approximately 100 °C.
5. Effective surface protection
Helps prevent damage from stone chips, road salt, dirt and abrasion.
6. Flexible adhesive system
The adhesive can help visually smooth minor imperfections and light abrasion on worn light surfaces.
7. Wet or dry installation
Can be installed with application fluid, a squeegee and a knife, or dry-installed when the surface and shape allow it.
8. High-gloss and partially self-healing
Minor surface marks in the film may be reduced by careful heating. Peel off the scratch-protective layer when the installation is nearly complete.
9. For more surfaces
Can also be used on rear lights and other suitable, smooth and exposed surfaces.
10. Adapted to the light
Order a sufficient size, install the film and then trim it to its final shape in place.
CHOOSE THE LOOK
Six options – from clear protection to distinctive styling
Choose transparent protection or give the lights a more individual tone. The final appearance and light transmission are affected by the film option, the light's base colour and the construction of the light.
Clear/Transparent
Clear, high-gloss protection that preserves the light's original appearance.
Smoke
A smoke-tinted option for a discreetly darker and more uniform appearance.
Dark Smoke+
The darker smoke-tinted option for a more distinctive styling effect.
Yellow
A yellow tint that creates a classic and expressive appearance.
Blue
A blue tint for a cooler and more individual look.
Devil Red
A red tint for bold, sportier styling.
Unsure which option to choose? Order a sample and assess the colour, transparency and gloss against your own light before ordering a larger piece.
View and order samples
STRAIGHTFORWARD INSTALLATION
Installed with fluid, squeegee and knife
Clean the light very thoroughly. For wet installation, moisten the surface and the adhesive side of the film with application fluid. Position the film and press out the fluid with an application squeegee.
Dry installation can be used on suitable surfaces, but it provides less opportunity to reposition the film once the adhesive has bonded.
CONTROLLED FORMING
Shape curved areas with a heat gun
Gradually heat the film with a heat gun to approximately 100 °C and shape it over the curved areas of the light. Keep the heat gun moving and avoid overheating the film or the light.
Once the film lies evenly, trim away the excess. Finish by checking the edges and peeling off the upper scratch-protective layer.
FOR MORE TYPES OF VEHICLES
Protect and refresh exposed light surfaces
ProShield® can be used on suitable headlights and rear lights on cars, lorries, motorcycles, snowmobiles and motorhomes. When removed correctly, the film can be taken off without damaging the light or leaving adhesive residue.
Headlights
Protection for lights exposed to stone chips, salt and road dirt.
Rear lights
Provides protection and a uniform appearance on compatible rear lights.
Multiple vehicle types
For cars, lorries, motorcycles, snowmobiles, motorhomes and other suitable vehicles.
Smooth protective surfaces
Can be used on other clean, smooth and materially compatible surfaces.
PEACE OF MIND AFTER PURCHASE
3-year product warranty
ProShield® headlight film is covered by a 3-year product warranty against fading, incorrect colour reproduction and cracking, subject to the applicable warranty terms.
The warranty requires the film to have been installed and used as intended. Normal wear, installation damage and damage caused by external factors are not covered unless otherwise stated in the terms.
Read about the product warranty
Important information about coloured and tinted films
Coloured or tinted film can affect the light's beam pattern and light transmission. You are responsible for ensuring that the selected film and installation comply with the regulations in force where the vehicle is used. Do not cover sensors, reflectors or other functions that must remain unobstructed.
Unsure about size, colour or installation?
Contact us before ordering. We will be happy to help you estimate the amount of material required and find an option suited to your vehicle and intended use.
The chat is open Monday–Sunday, 09:00–21:00.
SWEDEN / SEK
