SWEDEN / SEKClearshield® Pro ACTIVE™
PROTECTION DESIGNED TO BE BARELY NOTICEABLE
Developed for the paintwork you want to preserve
Active self-healing
Advanced polymer technology reacts immediately to fine scratches and superficial marks. No additional heat is required to start the process.
Hydrophobic surface
The cross-linked topcoat causes water to bead and helps repel mud, road dirt, insects and other contaminants.
Glossy premium finish
High optical clarity and a glossy surface allow the vehicle’s colour to shine through, creating a well-maintained, freshly waxed appearance.
Protection for the vehicle’s value
A transparent protective barrier helps preserve the original paintwork and the vehicle’s overall appearance – an advantage both during ownership and when the vehicle is sold in the future.
TECHNICAL DATA
Performance in every layer
| Total product thickness | 200 µm |
| TPU thickness | 150 µm |
| Elongation at break | > 250 % |
| Gloss, ASTM D523 | 92 GU |
| Stone chip test, SAE J400 | Passed |
| Self-healing in laboratory testing | < 1 minute** |
INSTALLATION
The foundation for a premium result
Work in a clean, dust-controlled environment at a temperature above 10 °C.
Thoroughly clean, degrease and decontaminate the paintwork. The surface must be free from wax, dirt and fibres.
Remove both the protective top sheet and the liner from the adhesive side before completing the installation.
Wet-apply and position the film, then work the installation solution outwards from the centre towards the edges.
Dry and inspect the surface carefully. Seal the edges thoroughly to help prevent water and dirt from penetrating underneath the film.
DOCUMENTATION & SUPPORT
Everything you need to get started
Read Solar Gard’s official product sheet with installation instructions and technical data, or watch the videos for a clearer overview of the product and installation process.
PREMIUM SOLUTIONS · ENGINEERED TO PERFORM
Protect the paintwork before damage occurs
Discover Clearshield® and our range of transparent paint protection films for the vehicle’s most exposed surfaces.
* The warranty applies in accordance with Solar Gard’s applicable warranty, product and installation terms at the relevant time. ** The stated result comes from Solar Gard’s laboratory test using a brass brush. Actual self-healing results may be affected by factors including scratch depth, temperature and surrounding conditions.
